Undo axle nut. Usually requires a big socket, air compressor and impact gun. Undo bolt or nut from lower ball join. Seperate ball joint from hub. Now hub swings out of the way. Outter axle should slide out with a little help from a hammer. You might need the nut on it if the threads need protection.
Robby. The trans is indeed 'adaptive'. This means it 'learns' your driving style and 'adapts' to that style. If you hammer it at every light, the trans will learn to shift late and firmly. If you are a very gentle type, the trans learns to shift early and almost imperceptably. This process of 'shifting, looking at the shift (comparing) making 202 22K views 3 years ago 2016 to 2019 Cruze Gen 2 transmission fluid change. The filter for automatic transmissions in this car is buried deep in the case requiring removal of the trans to Application Specification; Metric English; 6T40/6T45/6T50: Valve Body Cover Removal – Approximate Capacity; 5.0–7.0 liters: 5.3–7.4 quarts: Fluid Change – Drain Plug – Approximate CapacityFrom there you can see the bottom line. There is also a line that is farther up. You need to see which one is leaking. If its the upper one you can probably do it from the top. If its the lower one you will need to do it from the bottom of the car. You need a quick release tool for the transmission lines.5. Without disconnecting the electrical connector, unclip the engine control module with the bracket from the battery tray and hang aside. 6. Remove the fluid fill plug (1). 7. Compare the amount of fluid drained to the transmission refill capacity. Fill the transmission with the appropriate amount of fluid. 8. SUakW.